Skip to main content

Effect of Biochar Moisture Pre-conditioning on the Mechanical Properties of Metallurgical By-product Agglomerates

Recycling secondary iron-bearing materials is an important step toward more sustainable metallurgical production. Agglomeration allows fine by-products to be converted into mechanically stable bodies for furnace charging. At the same time, replacing fossil carbon in self-reducing agglomerates requires renewable carbon sources, and biochar is of interest because of its biogenic origin, porous structure, and reactivity. The same pore network, however, can disturb the early mixing stage. Added water may be drawn into the biochar before the organic binder can be sufficiently hydrated and distributed between neighbouring particles. This can change the local moisture balance, hinder binder distribution, and reduce green strength and handling stability.

This study investigates how the moisture state of biochar before mixing and the binder-to-moisture balance affect the mechanical properties of the produced agglomerates. Biochar was wetted before mixing, and agglomerates were prepared with starch-based binders and one additional biomass-derived binder candidate. The formulations were varied by the dry binder-to-total moisture mass ratio, considering both the water retained in the pre-conditioned biochar and the water added during mixing. The produced agglomerates were tested by compressive strength measurements and drop tests to compare their resistance to loading and repeated handling. The results are intended to support binder and moisture selection for biochar-containing self-reducing agglomerates.

Details

Author
Yongsu Lee1, Carsten Gondorf1, Thomas Echterhof1, Christian Wuppermann1, Lars Gronen2, Volkert Feldrappe2
Institutionen
1Department for Industrial Furnaces and Heat Engineering, RWTH Aachen, Kopernikusstr. 10, 52074 Germany; 2FEhS - Institut für Baustoff Forschung e.V., Bliersheimerstr. 62, 47229 Duisburg, Germany
Veranstaltung
GeoMinBochum 2026
Datum
2026
DOI
10.48380/chwy-2w23