Skip to main content

The influence of carbonates on hydraulic properties of silts (natural loams and artificial mixtures) as function of fabric/microstructure, mineralogy and fluid composition

The Sandwich sealing system, as part of engineered barrier system to deposit radioactive waste, is composed of sealing segments (DS) made of bentonite and equipotential segment (ES) made of fine granular mineral material. While DS ensure the required sealing properties, the ES serves to homogenize the wetting of the DS, which needs to meet hydraulic requirement of permeability between 10-11-10-15m2.

ES materials are composed of fine sand, silicates and carbonates. Mixtures with carbonates showed higher rising heights in column test experiments (Schuhmann et al. 2009). Either particle size distribution (PSD), surface properties of calcium carbonates or a combination of both could determine hydraulic properties of ES.

Surface wettability describes the ability of a liquid to spread on a solid surface, which can be quantified by measuring contact angle (CA). CA in turn determines the effect of capillary rise.

Thus, contact angles of different calcium/magnesium carbonates as calcites and dolomites were measured. Sessile drop method (SDM) with compressed tablets and Washburn method (WM) were utilized. In general, all the carbonates were hydrophilic with CA between 27° and 85°. Results varied as different preparations changed the geometry and surface properties of powders. CAs of one calcite sample with D50 of 7.7 μm were 30° ± 5° with n-Hexane, non-measurable with ethanol in WM, 34° in average in SDM.

In the same time, PSD and pore volume were measured to shed light on if there is relation between CA.

Details

Author
Xiaoyue Liu1
Institutionen
1Karlsruhe Institute of Technology, Germany
Veranstaltung
GeoMinBochum 2026
Datum
2026
DOI
10.48380/nk0h-c632