Skip to main content

X-ray micro computed tomography (µXCT) as a tool for the characterization and evaluation of pyrometallurgical products from slag recycling throughout different scales

Slags are by-product materials resulting from the smelting and refining of metals. Due to their potential residual environmental toxic compounds, they pose an environmental threat. However, some of the metals in the slags can be recovered, and metals and slags can be utilized by the industry. One technique for recovering these metals is smelting. This process depends on achieving the correct mixture of slag-forming species and flux materials to obtain the suitable viscosity for separating metal from slag, while keeping the process energy efficient. To determine the mixtures that generate the highest metal yield and best phase separation, simulation studies are carried out, followed by lab-scale experiments, and then the optimal mixture is scaled up to pilot-plant experiments.

X-ray micro computed tomography (µXCT) is an invaluable tool for visualization and quantitative evaluation of the results of smelting experiments. Using devices with different energy capabilities, it is possible to screen and evaluate the results of pyrometallurgical products from lab to pilot plant-scale. Combining these capabilities, characteristics such as metal droplets shapes, sizes and distribution within the slag as well as gas bubbles formation in slags and metals can be accessed without needing sample preparation. Additionally, quantifying the sizes of the metal nuggets can be used to determine metal density and total volume recovered. Examples of pyrometallurgical experiments evaluated with µXCT will be presented.

Systematically using this method opens up new possibilities for quickly visualizing and quantifying the results of pyrometallurgical experiments with minimal preparation effort while leaving further analytical possibilities open.

Details

Author
Rafaela Debastiani1, Praicy Ann Joseph1, Junnile Romero1, Md Naziat Hossain1, Volker Recksiek1, Jonathan Sittner2, Dietmar Meinel2, Ajay B. Patil3, Axel D. Renno1
Institutionen
1Helmholtz-Zentrum Dresden Rossendorf, Helmholtz Institute Freiberg for Resource Technology, Germany; 2Federal Institute for Materials Research and Testing, Germany; 3Helmholtz-Zentrum Dresden Rossendorf, Helmholtz Institute Freiberg for Resource Technology, Germany;The University of Jyväskylä, Faculty of Science and Mathematics,Department of Chemistry, Finland
Veranstaltung
GeoMinBochum 2026
Datum
2026
DOI
10.48380/aejy-x218